Mercedes-Benz COMAND Operating Instructions Manual page 76

Climate control settings
74
Sync
With the O (synchronization) option,
you can decide whether you wish to activate
the climate control settings for all zones
together or separately.
Call up the climate control menu
X
( page 73).
Y
To switch to the footer: slide 6 the con-
X
troller.
To select O Sync: turn and press the con-
X
troller.
Switch the synchronization function on O
X
or off ª.
With the synchronization function switched
off, you can alternate between driver and
front passenger.
To switch from the footer to the main area:
X
slide 5 the controller.
To switch between left and right: slide
X
1 the controller.
Not all climate control functions allow
switching between the driver and front
passenger.
Further information on the synchronization
function (see the vehicle Operator's Manual).
Rear-compartment climate control set-
tings
This setting is made in the bottom bar of the
climate control menu.
You can also set the rear-compartment air
conditioning from the front.
Call up the climate control menu
X
( page 73).
Y
To switch to the footer: slide 6 the con-
X
troller.
Rear Setting: turn and press
To select
X
the controller.
Activate the rear-compartment climate
control settings. The vehicle interior dis-
play changes accordingly.
To switch the setting back to the front
X
Return to
again: select
After a short time, COMAND automatically
switches the adjustment functions back to
the front.
Adjusting the footwell temperature
This setting is made in the main area of the
climate control menu.
Call up the climate control menu
X
( page 73).
Y
Adjust Footwell: turn and
To select
X
press the controller.
If necessary, change sides: slide 1 the
X
controller.
To change the setting: turn and press the
X
controller.
Exiting a menu
Press the % button.
X
Front.