Establishing The Connection From The Mobile Phone - Mercedes-Benz COMAND Operating Instructions Manual

Establishing the connection from the
mobile phone
®
The Bluetooth device name of COMAND is
"MB Bluetooth".
COMAND: call up the telephone menu.
X
To switch to the menu bar: slide 6 the
X
controller.
To select Connect Connect Device
X
troller and press to confirm.
The device list is displayed.
To select Connect via Connect via Phone
X
press the controller.
A message is displayed, stating that you
can start the search on your mobile phone.
Mobile phone: start the search for a Blue-
X
®
tooth device (see manufacturer's operat-
ing instructions).
COMAND is displayed with the name "MB
Bluetooth" in the mobile phone's device
list.
Select "MB Bluetooth".
X
A prompt appears in the COMAND display
asking if the mobile phone should be
authorized.
COMAND: select Yes Yes.
X
If No No is selected, the procedure is canceled.
If your mobile phone supports Secure Sim-
ple Pairing, a code is now displayed on both
devices.
The code is the same
COMAND: select Yes Yes.
X
Mobile phone: confirm the code. Depend-
X
ing on the mobile phone used, you may
have to confirm the connection to
COMAND and for the PBAP and MAP Blue-
®
tooth profiles individually. You may also
save the confirmation on the mobile phone
(see the manufacturer's operating instruc-
tions).
The mobile phone is now authorized and
connected to COMAND. You can now
speak using the hands-free system.
Connecting/disconnecting a mobile phone
Device: turn the con-
Phone: turn and
To ensure an optimum language quality,
you can set the mobile phone's transmis-
sion and reception volume (
The code is different
COMAND: select No. No
X
The process is canceled. Repeat the pro-
cedure.
If your mobile phone does not support Secure
Simple Pairing, an input menu is displayed for
the passkey. The passkey is a one- to sixteen-
digit number combination which you can
choose yourself. Enter the same passkey on
both COMAND and the mobile phone and
confirm. Depending on the mobile phone
used, you may have to confirm the connection
to COMAND and for the PBAP and MAP Blue-
®
tooth profiles.
Reconnecting automatically
COMAND always searches for the last con-
nected mobile phone.
If no connection can be made to the most
recently connected mobile phone, the system
searches for the mobile phone that was con-
nected before that one.
Switching between mobile phones
If you have authorized more than one mobile
phone, you can switch between the individual
phones.
To call up the telephone menu: press the
X
% button.
To switch to the menu bar: slide 6 the
X
controller.
To select Connect Device Connect
X
troller and press to confirm.
The device list is displayed.
To select the desired mobile phone: turn
X
and press the controller.
The selected mobile phone is connected if
it is within Bluetooth
®
tooth is activated.
page 108).
Y
Device: turn the con-
®
range and if Blue-
Z
107