Operation; Unpacking; Mounting The Head - Vinten Vector 700H Operator's Manual

Pan & tilt head
Hide thumbs Also See for Vector 700H:
Table of Contents

Advertisement

Unpacking

The head is supplied with one pan bar and a battery (fitted) for the level bubble illumination unit.
The flat base version is supplied with four mounting bolts, four washers and a spanner. The Mitch-
ell fixing version is supplied with a lightweight Mitchell adaptor.
A second telescopic pan bar or short pan bar for use with a zoom or focus controller are optional.
Ensure that all items are unpacked prior to disposal of the packing materials.
After unpacking ensure that:
The centre lock
lock before lifting or carrying the head. Lift the head by the base and/or the carrying handle,
not the platform.
The pan and tilt brakes

Mounting the head

NOTE:
When mounted on Vinten 'Hawk' or 'Teal' pedestals, clearance between the
head and the pedestal weight tray prevents the use of 5.5 lb (1.6 kg) and 1.0 lb
(0.47 kg) trim weights. Use alternative weights or fit the adaptor plate kit (Part
No. 3354-900SP) between the head and pedestal.
Flat base
WARNING! Before installing the head, hold a fixing bolt in position and
The head is mounted on a tripod, pedestal or suitable firm surface using the four fixing bolts and
washers. Tighten the bolts with the spanner provided.
After mounting the head, use the level bubble
ed by pressing the switch (7). The light will go out after approximately 15 seconds.
Mitchell-type fixing
Remove the clamp knob and washer. Position the head on the tripod or pedestal, ensuring that
the spigot is seated and the key is engaged in the slot. Refit the clamp washer and knob and tight-
en securely.
After mounting the head, use the level bubble
ed by pressing the switch (7). The light will go out after approximately 15 seconds.

Operation

(15)
is engaged
(See Locking the
(4)(5)
are on
(See Pan and tilt
check that the threaded end does not project more than 12 mm
(1/2 in.) above the mounting face.
platform). Always engage the centre
brakes).
(8)
to set it level. The level bubble may be illuminat-
(8)
to set it level. The level bubble may be illuminat-
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vector 700

Table of Contents