ASSEMBLY INSTRUCTIONS
A.
Attach the 3 Screws(M6X30mm) to the
screw holes of the C o nnector.
(N O T E :T ig h te n all the S c e w s.)
C.
Attach the Pole to the Connector.
ASSEMBLY AND INSTRUCTIONS
B.
Fit the C o n n e c to r to the base by inserting
the prefixed Screw s into the three holes
using 3 W ashe rs (M6), 3 Spring w a sh e rs
(M 6) and 3 Nuts (M 6 ).T ig h te n the nuts .
6