Paramount Fitness PH-S-127 Instruction Manual page 7

ASSEMBLY AND INSTRUCTIONS
D.
Set the table onto the pole . Use
the 4 Philips bolts (M6 x 13mm) and 4 Washers (M6).
To secure the table
E.
Put the Reflector together using the 9
Bolts(M6X8) and the 9 Nuts.
Starting with the outer ring
F.
Place a steel washer over each bolt on
the Top of the burner assembly unit
Lay reflector over the burner top bolts
add another steel washer to each bolt
Use Claw nuts to fasten reflector to the
burner unit
G.
Connect the regulator to the hose first;
Slide hose through bottom of the base and attach to the burner assembly unit.
Attach burner assembly head unit to the with the 4 screws (M6x10mm)
7