Tools And Parts Needed For Assembly - Paramount Fitness KLD7002S Instruction Manual
Hide thumbs
Also See for KLD7002S:
- Instruction manual (16 pages) ,
- Operating instructions manual (15 pages) ,
- Manual (16 pages)
Table of Contents
Advertisement
DANGER
WARNING: Improper installation, adjustment,
alteration, service or maintenance can cause injury
or property damage.
operating and maintenance instructions thoroughly
before installing or servicing this equipment.
WARNING :
For Outdoor Use Only
LPG Cylinders to be used must be constructed and
marked in accordance with US DOT specifications.
Storage of the heater indoors is permissible only
if the gas cylinder is turned off and removed.
N
OTE:
Use only 20lb LP-Gas tank with size of 18.1in
/ 46cm(Height)*12.5in / 32cm (Width).
Do not use if the environment temperature is
below 40 degrees F / 4.4 degrees C.
The LP gas cylinder to be used must be provided
with a listed overfilling prevention device.
Do not store a spare LP-gas cylinder under or
near this appliance.
Never fill the cylinder beyond 80 percent full.
The gas pressure regulator provided with this
appliance must be used. This regulator is set for
an outlet pressure of 11 inches water column.
Tools and parts needed for assembly
CARBON MONOXIDE HAZARD
This appliance can produce carbon monoxide
which has no odour.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed space
such as a camper, tent, car or home.
Read the installation,
- 2 -
Tools needed:
Open end wrench 10 &
●
13mm (included)
NOT included:
Adjustable opening wrench
●
8'' long
Philips screwdriver
●
w/ medium blade
Spray bottle of soapy
●
solution for leak testing
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KLD7002S and is the answer not in the manual?
Questions and answers
I cannot get the heater to light. Also, is the gas line to the pilot lighting probe the larger pipe coming from the propane supply fitting.G I don't see a tube going to the pilot lighting probes.
To troubleshoot the Paramount Fitness KLD7002S heater that won't light:
1. Check if the gas pressure is low or the fuel tank is nearly empty. Refill or replace the tank if needed.
2. Make sure the control valve is turned to the ON position.
3. Inspect the thermocouple; replace it if faulty.
4. Ensure the light assembly is not bent and is correctly positioned.
5. Confirm the main gas hose is not bent or twisted; straighten it and perform a leak test.
6. Check for a blockage in the burner injector; clean or replace it if needed.
The document does not specify whether the larger pipe from the propane supply fits the gas line to the pilot lighting probe.
Answer:
- Troubleshoot by checking fuel level, control valve position, thermocouple, light assembly, gas hose, and burner injector.
- The connection of the larger pipe from the propane supply to the pilot lighting probe is not specified.
Final answer:
Troubleshoot by checking fuel level, control valve, thermocouple, light assembly, gas hose, and burner injector. The connection of the larger pipe to the pilot lighting probe is not specified.
This answer is automatically generated