CONEX-PSD
EDH0315En1030 — 07/16
2.4.2.2
Wavelength Consideration
The sensor should be operated with beam power between 0.1mW and 1mW.
Nonlinearities and saturation can occur above 1mW.
2.5
Sensor Care
The input window is coated with a soft silicone resin. Avoid touching the
window to keep grime from accumulating or prevent surface damage that can
decrease the PSD's sensitivity. External force applied to the resin surface may
deform or cut off the wires.
Silicone resin swells when it absorbs organic solvents, so do not use any solvent other
than Alcohol.
Two-Axis Position & Power Sensing Device
WARNING
D
O NOT TOUCH SENSOR WINDOW
WARNING
U
SE ONLY ALCOHOL TO CLEAN SENSOR WINDOW
6
.
.