Newport CONEX-PSD User Manual page 7

CONEX-PSD
Sales, Tech Support & Service
North America & Asia
Newport Corporation
1791 Deere Ave.
Irvine, CA 92606, USA
Sales
Tel.: (877) 835-9620
e-mail: sales@newport.com
Technical Support
Tel.: (800) 222-6440
e-mail: tech@newport.com
Service, RMAs & Returns
Tel.: (800) 222-6440
e-mail: service@newport.com
Maintenance
The CONEX-PSD Controller/Driver should only be cleaned with a lightly damped cloth
or sponge with a soapy water solution. Do not use an acetone or alcohol solution; this
will damage the finish of the enclosure.
Service Information
The user should not attempt any maintenance or service of the CONEX-PSD
Controller/Driver and its accessories beyond the procedures outlined in this manual.
Any problem that cannot be resolved should be referred to Newport Corporation. When
calling Newport regarding a problem, please provide the Tech Support representative
with the following information:
• Your contact information.
• System serial number or original order number.
• Description of problem.
• Environment in which the system is used.
• State of the system before the problem.
• Frequency and repeatability of problem.
• Can the product continue to operate with this problem?
• Can you identify anything that may have caused the problem?
Complete a copy of the Service Form as represented at the end of this document and
include it with your shipment.
vii
Two-Axis Position & Power Sensing Device
Europe
MICRO-CONTROLE Spectra-Physics S.A.S
9, rue du Bois Sauvage
91055 Évry CEDEX
France
Sales France
Tel.: +33 (0)1.60.91.68.68
e-mail: france@newport.com
Sales Germany
Tel.: +49 (0) 61 51 / 708 – 0
e-mail: germany@newport.com
Sales UK
Tel.: +44 (0)1635.521757
e-mail: uk@newport.com
Technical Support
e-mail: tech_europe@newport.com
Service & Returns
Tel.: +33 (0)2.38.40.51.55
EDH0315En1030 — 07/16