Mallinckrodt INOmax DSIR Pocket Manual page 54

Changing INOMAX
Cylinders
Changing INOMAX Cylinders (cont.)
E. Open the cylinder valve (this
may activate the "Two Cylinders
Open" alarm until the empty
cylinder valve is closed).
Note: If using the INOmax DS
Transport Regulator/Cap
Assembly, transfer the cap from
the exhausted INOMAX cylinder
to the new INOMAX cylinder
at this time; the "Cylinder Not
Detected" alarm may occur.
F. Close the cylinder valve on the
empty cylinder and remove
the hose from the back of the
INOmax DS
G. Depressurize and remove the regulator from the
empty cylinder.
Part No. 20728 Rev-01
2012-09
IR
.
IR
54