Mallinckrodt INOmax DSIR Pocket Manual page 2

IMPORTANT: This guide is provided as a convenience
Overview
INOmax DS
IR
The INOmax DS
which will allow the INOmax DS
(which is mounted to each INOMAX
The INOmax DS
transceiver mounted directly above each INOMAX cylinder. When
INOMAX cylinders are loaded, communication will take place between
the INOmax DS
INOmax DS is complete. A cylinder icon will be displayed on the
IR
main screen when an INOMAX cylinder is recognized by the
INOmax DS .
IR
INOmax DS
IR
This assembly is used during medical transport to provide pressurized
INOMAX to the INOmax DS
information via Infrared transceivers between the INOmax DS
(PN 10007) and the INOmeter.
The transport cap assembly provides Infrared technology molded in
the cap. This allows the INOmax DS
with the INOmeter, which is mounted to each INOMAX cylinder.
Part No. 20728 Rev-01
2012-09
and for general information only. Do not use
this product without clearly and thoroughly
understanding the most recent revision of the
INOmax DS
®
IR
Manual is the source for specific, updated
information regarding warnings, cautions,
checklists, diagrams, and/or instructions
contained in this guide.
has an interface using infrared (IR) technology
IR
cart (PN 10018) has a cover with an infrared
IR
and the INOmeter after the boot up phase of the
IR
Transport Regulator/Cap Assembly
as well as communicate INOMAX use
IR
Operation Manual. The Operation
to communicate with the INOmeter
IR
cylinder).
®
to communicate via Infrared
IR
2
®
IR