Mallinckrodt INOmax DSIR Pocket Manual page 43

WARNING: If the INOmax DS
vehicle, it should be affixed to the transport
mounting post part number 10009 (see Figure 10).
Figure 10
Figure 11
Caution:
When using the Transport Regulator/Cap Assembly (PN 10022)
ensure the cap is fully seated and in place on the INOmeter
and the infrared cable is connected and latched to the infrared
connector port on the back of the INOmax DS
It is recommended that a second transport regulator cap
assembly is available during all transports.
is to be used in a transport
IR
(see Figure 11).
IR
43
Circuit Connection
Diagrams
Part No. 20728 Rev-01
2012-09