Energy; Power Factor - GE 850 Instruction Manual

CHAPTER 11: METERING

Energy

Power Factor

850 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
Path: Metering > Energy 1(X)
Reset Energy D/T
Range: MM/DD/YY HH:MM:SS
Positive Watt Hours (Pos WattHours)
Range: 0.0 MWh to 214748364.7 MWh
Pos WattHours Cost
Default: 0.0 $
Negative Watt Hours (Neg WattHours)
Range: 0.0 MWh to 214748364.7 MWh
Neg WattHours Cost
Default: 0.0 $
Positive Var Hours (Pos VarHours)
Range: 0.0 Mvarh to 214748364.7 Mvarh
Negative Var Hours (Neg VarHours)
Range: 0.0 Mvarh to 214748364.7 Mvarh
The power factor value input to the power factor element(s) is displayed here. Note that
the value may not be equal to the power factor value displayed under Metering > Power 1
since the supervision conditions are applied in the element.
Path:
Metering > Power Factor
POWER FACTOR 1(X)
Range: -0.99 to 1.00 in steps of 0.01
Default: 0.00
ENERGY
11–13