SOFTWARE INTERFACE
NOTE:
NOTE
File Support
3–32
5.
For setpoints requiring non-numerical pre-set values (e.g. Phase VT Connection
below), clicking anywhere within the setpoint value box displays a drop-down
selection menu arrow. Select the desired value from this list.
6.
In the Setpoints > System Setup > Voltage Sensing dialog box, click on Save to save
the values into the 850. Click YES to accept any changes and exit the window. Click
Restore to retain previous values. Click Default to restore Default values.
7.
For setpoints requiring an alphanumeric text string (e.g. "relay name"), the value may
be entered directly within the setpoint value box.
When using Setpoint Groups, an element from one group can be dragged and dropped on
the same element in another group, copying all settings.
Opening any EnerVista 8 Series Setup file automatically launches the application or
provides focus to the already opened application.
New files are automatically added to the tree.
850 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INTERFACES