Auto-Lock Button; Needle Up/ Down Position Button - ELNA Carina Instruction Manual

Operation buttons
Patterns
Patterns
Patterns
Direct Patterns

Auto-lock button

When the Direct Patterns 1-4 and Patterns 00-04
selected, the machine will immediately sew 3 locking
stitches when the Auto-lock button is pressed, then
automatically stop.
The LCD will display the figure "
is stopped.
Please Note:
The LCD will display the figure "
Patterns 1-4 and Patterns 00-04
button will cancel this function and press it again to
restore.
When the Direct Patterns 5-7 and Patterns 05-14, 26-
99 are selected, press the Auto-lock button, the
machine will sew 3 locking stitches at the end of the
current pattern and automatically stop.
The LCD will display the figure "
machine is stopped. The function will be cancelled if
you press the button once again or select another
pattern.

Needle up/ down position button

With the Needle up/ down position button, you decide
whether the needle shall stop in the up position or in
the material when you stop sewing.
Please Note: During sewing, press the button will
be no function.
Press the button so that the arrow, on the LCD screen,
will point upward " " and the needle will stop in the
highest position. When you press the button so that the
arrow points downward "
with the needle in the lowest position.
22
are
" until the machine
" when the Direct
are selected. Press " "
" until the
", the machine will stop