Programming Worksheets - DSC PC2585 Installation Manual

PROGRAMMING WORKSHEETS

NOTE: In Sections [01] through [17], do not enter data in Sections that are not used.
AFTER EXITING THE INSTALLER'S PROGRAMMING MODE, ARM AND THEN DISARM THE
SYSTEM TO RETURN THE ZONES AND THE [F], [A] AND [P] KEYS TO NORMAL OPERATION.
[01] First Telephone Number
Enter [0] for the digit "0" (zero) in the telephone number. Enter [#] to end the telephone number entry.
When using Pulse Dialing, do not enter [ ] or [#] in the Telephone Numbers.
[02] First Account Code
For 3-digit Account Codes, enter [0] for the last digit. Where "0" (zero) is required in the Account Code, enter
HEX A ([ ][1][ ]).
[03] Second Telephone Number
[04] Second Account Code
[05] Third Telephone Number
[06] Third Account Code
[07] Alarm Reporting Codes, Zones 1 - 8
For single-digit reporting codes, enter [0] as the second digit. Enter [ ][1][ ] (hex A) to transmit a "0"
(zero).
Zone 1 Alarm
Zone 2 Alarm
Zone 3 Alarm
Zone 4 Alarm
Zone 5 Alarm
Zone 6 Alarm
Zone 7 Alarm
Zone 8 Alarm
[08] Restoral Reporting Codes, Zones 1 - 8
Zone 1 Restoral
Zone 2 Restoral
Zone 3 Restoral
Zone 4 Restoral
Zone 5 Restoral
Zone 6 Restoral
Zone 7 Restoral
Zone 8 Restoral
38
Page 18
Page 18
Page 18
Page 18
Page 18
Page 18
Page 19
Page 20
1.1R
PC2585 v