DSC Maxsys PC6010 Programming Manual
  1. Manuals
  2. Brands
  3. DSC Manuals
  4. Control Panel
  5. Maxsys PC6010
  6. Programming manual

DSC Maxsys PC6010 Programming Manual

Hide thumbs Also See for Maxsys PC6010:
Table of Contents

Advertisement

Quick Links

See also: System Manual , User Manual
Programming Manual
®
PC6O1O Software Version 2.1

Advertisement

Table of Contents
loading

Related Manuals for DSC Maxsys PC6010

Summary of Contents for DSC Maxsys PC6010

  • Page 1 Programming Manual ® PC6O1O Software Version 2.1...
  • Page 3 Introduction Using PC6010 Manuals There are 3 main manuals for PC6010 installers: This manual (Programming Manual) contains a description of all the PC6010 v2.1 programming sections. Use this manual • System Manual when you want to know what a programming section is for, •...

  • Page 4: Table Of Contents

    Main Programming Sections The PC6010 Installer’s Programming is broken down into 5 major sections: System Section: You will find programming options which affect the operation of the entire system in this section. For example communications, downloading, printer options etc. are options which affect the overall system and are programmed in the system area.

  • Page 5: System Section Installer Opt's

    SYSTEM SECTION SYSTEM SECTION SYSTEM SECTION SYSTEM SECTION SYSTEM SECTION INSTALLER OPTS INSTALLER OPTS INSTALLER OPTS INSTALLER OPTS INSTALLER OPTS Installer Options This section contains the Installer’s Code, Walk Test Code and System Reset options. INSTALLER OPTS INSTALLER OPTS INSTALLER OPTS INSTALLER OPTS INSTALLER OPTS (00)

  • Page 6: System Options

    SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM OPTIONS SYS TOGGLE OPT SYS TOGGLE OPT SYS TOGGLE OPT SYS TOGGLE OPT SYS TOGGLE OPT System Options This section contain options that are relevant to the entire system. System Toggle options, Keypad SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM OPTIONS...
  • Page 7 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM TIMES SYSTEM TIMES SYSTEM TIMES SYSTEM TIMES SYSTEM TIMES Keypad Lockout Options This section contains programming for the keypad and reader lockout features. After a programmed KYPD LOCKOUT OPT KYPD LOCKOUT OPT KYPD LOCKOUT OPT...
  • Page 8 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM OPTIONS SYSTEM TIMES SYSTEM TIMES SYSTEM TIMES SYSTEM TIMES SYSTEM TIMES SYSTEM AREA SYSTEM AREA SYSTEM OPTIONS SYSTEM OPTIONS ARM/DISARM MASK ARM/DISARM MASK SYSTEM AREA SYSTEM AREA...

  • Page 9: Dls Section

    SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA DLS SECTION DLS SECTION DLS SECTION DLS SECTION DLS SECTION DLS TOGGLES DLS TOGGLES DLS TOGGLES DLS TOGGLES DLS TOGGLES Download Section SYSTEM AREA SYSTEM AREA DLS SECTION DLS SECTION PERIODIC CALLUP PERIODIC CALLUP SYSTEM AREA...
  • Page 10 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA DLS SECTION DLS SECTION DLS SECTION DLS SECTION DLS SECTION Other DLS Programming Enter the telephone number for the DLS computer, if either Periodic DLS, or DLS Callback is enabled. PHONE NUMBER PHONE NUMBER PHONE NUMBER...

  • Page 11: Communicator

    SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR MAIN ITEMS MAIN ITEMS MAIN ITEMS MAIN ITEMS MAIN ITEMS Communicator Section All options concerning telephone line communications can be programmed, including telephone COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR...
  • Page 12 There are 2 formats in the PC6010 for communicating with the central station: SIA and Contact ID. The COMMS COMMS FORMAT FORMAT COMMS COMMS COMMS FORMAT FORMAT FORMAT system must be programmed to use the same communications format as the receiver at the central ( 1 ) ( 1 ) ( 1 )
  • Page 13 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR MAIN ITEMS MAIN ITEMS MAIN ITEMS MAIN ITEMS MAIN ITEMS This section determines which reporting codes are sent to the selected telephone number. All reporting DIALER DIRECTION DIALER DIRECTION DIALER DIRECTION...
  • Page 14 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMS TOGGLES COMMS TOGGLES COMMS TOGGLES COMMS TOGGLES COMMS TOGGLES Communicator Toggles Select options relevant to the telephone line communications of the panel. Toggle options are given in COMMS TOGGLES COMMS TOGGLES COMMS TOGGLES...
  • Page 15 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMS TOGGLES COMMS TOGGLES COMMS TOGGLES COMMS TOGGLES COMMS TOGGLES SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMS MISC COMMS MISC SYSTEM AREA SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMUNICATOR...
  • Page 16 SYSTEM AREA SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMS MISC COMMS MISC COMMS MISC TEST CODE TX TEST CODE TX TEST CODE TX SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMS MISC COMMS MISC TEST CODE TX TEST CODE TX Auto Contact ID? AUTO CONTACT ID AUTO CONTACT ID...
  • Page 17 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR REPORTING CODES REPORTING CODES REPORTING CODES REPORTING CODES REPORTING CODES Reporting Codes Reporting codes are 2 digit codes which are sent to the receiver at the central station, along with the area ID REPORTING REPORTING CODES...
  • Page 18 Reporting Codes for the restoral of module tampers. MOD TAMP RESTORE MOD TAMP RESTORE MOD TAMP RESTORE MOD TAMP RESTORE MOD TAMP RESTORE (05) (05) (05) (05) (05) There are 64 keypad tamper restoral reporting codes, one for each keypad that can be enrolled onto PC6501 PC6501 PC6501...
  • Page 19 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR REPORTING CODES REPORTING CODES REPORTING CODES REPORTING CODES REPORTING CODES If a user enters too many incorrect access codes (see “Total Bad Codes” under “Keypad Lockout KEYPAD KEYPAD LOCKOUT...
  • Page 20 • TLM Restoral - If there is a telephone line trouble, the PC6010 will not be able to communicate with the central station until the telephone line is restored. When the line is restored, the system sends TLM Restoral reporting code. •...
  • Page 21 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR COMMUNICATOR REPORTING CODES REPORTING CODES REPORTING CODES REPORTING CODES REPORTING CODES Police Code Alarm is an additional alarm notification feature. When a zone on an armed area goes into POLICE CODE ALARM POLICE CODE ALARM POLICE CODE ALARM...

  • Page 22: Links Module

    SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA LINKS MODULE LINKS MODULE LINKS MODULE LINKS MODULE LINKS MODULE Links Module These section options are relevant to the LINKS1000 operation. LINKS LINKS LINKS LINKS LINKS MODULE MODULE MODULE MODULE MODULE ( 4 ) ( 4 )

  • Page 23: Sw Aux Output

    SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SW AUX OUTPUT SW AUX OUTPUT SW AUX OUTPUT SW AUX OUTPUT SW AUX OUTPUT Switched Auxiliary Output SYSTEM AREA SYSTEM AREA MAIN BELL OUTPUT MAIN BELL OUTPUT SYSTEM AREA SYSTEM AREA SYSTEM AREA MAIN BELL OUTPUT...

  • Page 24: Pgm Outputs

    SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM Outputs PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS (06) (06) (06) (06) (06) Main PGM1 and PGM2 Outputs The PGM outputs can be programmed to activate for any one of the 56 options listed in the PGM MAIN PGM1 OUT MAIN PGM1 OUT...
  • Page 25 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM Pulse Times This section will allow you to select the amount of time a programmable output will remain active, after PGM PULSE TIMES PGM PULSE TIMES PGM PULSE TIMES...
  • Page 26 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS Programmable Output Options The output will activate when any fire or zone alarm occurs on any of the selected areas. FIRE AND BURG FIRE AND BURG FIRE AND BURG...
  • Page 27 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS This output will follow a selected zone. Any one of the 256 zones can be selected. If the zone is opened, ZONE FOLLOW ZONE FOLLOW ZONE FOLLOW...
  • Page 28 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS This output will activate when a zone tamper (or zone fault) condition occurs and remain active for the duration TAMPER TAMPER TAMPER TAMPER...
  • Page 29 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS PGM OUTPUTS The output will deactivate when any alarm occurs on any of the selected areas. The output will stay INV LATCHED STROBE INV LATCHED STROBE INV LATCHED STROBE INV LATCHED STROBE...

  • Page 30: Event Scheduling

    SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING Event Scheduling Event scheduling allows for a variety of timed events to occur on specific dates and times. Openings and EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING...
  • Page 31 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING The panel uses date schedules to control the period during which an event will occur. There are 99 date DATE SCHEDULES DATE SCHEDULES DATE SCHEDULES DATE SCHEDULES...
  • Page 32 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING Example: Setting up a date schedule to control programmable outputs: PGM1 output programmed for Date Schedule following Date Schedule - 04 Pulse Timer - 10 PC6204 - output number 2 programmed for Date Schedule following Date Schedule number 04...
  • Page 33 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING Holiday Groups allow for exceptions to the regular date schedule. There are four Holiday Groups. Up to two HOLIDAY SCHEDULE HOLIDAY SCHEDULE HOLIDAY SCHEDULE HOLIDAY SCHEDULE...
  • Page 34 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING EVENT SCHEDULING Arming/disarming schedules are used to auto arm or auto disarm area(s) according to the selected date ARM/DISARM SCHED ARM/DISARM SCHED ARM/DISARM SCHED ARM/DISARM SCHED ARM/DISARM SCHED...

  • Page 35: 6820 Options

    PC6820 Options SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS The PC6820 Access Control module allows the PC6010 have access control of up to 32 doors. Each 6820 6820 OPTIONS OPTIONS...
  • Page 36 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS Unlock Door on Request To Exit? UNLOCK ON REX? UNLOCK ON REX? UNLOCK ON REX? UNLOCK ON REX? UNLOCK ON REX? YES = A Request To Exit will cause the door to unlock for the programmed Door Unlock Time.
  • Page 37 SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS Arm Disable? ARM DISABLE? ARM DISABLE? ARM DISABLE? ARM DISABLE? ARM DISABLE? YES = When all areas assigned in the PC6820 Arm/Disarm Mask are armed, the reader will be disabled. N N N N N The LED will not function and access will never be granted until at least one area is disarmed.

  • Page 38: Kp/Rd Assignment

    SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA SYSTEM AREA 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS 6820 OPTIONS Select a date schedule to determine at what times the selected areas may be armed by a user presenting ARM REQ. SCHED. ARM REQ.

  • Page 39: Area Section

    AREA SECTION AREA SECTION AREA SECTION AREA SECTION AREA SECTION ADD/ D/EDIT AREA EDIT AREA EDIT AREA EDIT AREA EDIT AREA AREA TOGGLES AREA TOGGLES AREA TOGGLES AREA TOGGLES AREA TOGGLES Area Section Add/Edit Area. Only area 1 is enabled by default. To enable more areas, select the Add/Edit area section, ADD/EDIT ADD/EDIT ADD/EDIT...
  • Page 40 AREA SECTION AREA SECTION AREA SECTION AREA SECTION AREA SECTION ADD/ D/EDIT AREA EDIT AREA EDIT AREA EDIT AREA EDIT AREA AREA TIMES AREA TIMES AREA TIMES AREA TIMES AREA TIMES Area Times The following programming sections are for programming various times separately for each area. AREA AREA AREA...
  • Page 41 AREA SECTION AREA SECTION AREA SECTION AREA SECTION AREA SECTION ADD/ D/EDIT AREA EDIT AREA EDIT AREA EDIT AREA EDIT AREA ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT Zone Assignment This section is for assigning type and options for each individual zone. ZONE ZONE ZONE...
  • Page 42 AREA SECTION AREA SECTION AREA SECTION AREA SECTION AREA SECTION ADD/ D/EDIT AREA EDIT AREA EDIT AREA EDIT AREA EDIT AREA ZONE TYPE ZONE TYPE ZONE TYPE ZONE TYPE ZONE TYPE Each zone can have its own unique label to help identify it on the LCD keypad. Upon first entering this ZONE ZONE LABEL...
  • Page 43 AREA SECTION AREA SECTION AREA SECTION AREA SECTION AREA SECTION ADD/ D/EDIT AREA EDIT AREA EDIT AREA EDIT AREA EDIT AREA ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE TYPE ZONE TYPE ZONE TYPE ZONE TYPE ZONE TYPE A 24 Hour Bell zone is active at all times, and will create an alarm whether the area is armed or disarmed.
  • Page 44 AREA SECTION AREA SECTION AREA SECTION AREA SECTION AREA SECTION ADD/EDIT AREA ADD/EDIT AREA ADD/EDIT AREA ADD/EDIT AREA ADD/EDIT AREA ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE TYPE ZONE TYPE ZONE TYPE ZONE TYPE ZONE TYPE AREA SECTION AREA SECTION ADD/EDIT AREA...

  • Page 45: Delete Area

    AREA SECTION AREA SECTION AREA SECTION AREA SECTION AREA SECTION ADD/ D/EDIT AREA EDIT AREA EDIT AREA EDIT AREA EDIT AREA ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ZONE ASSIGNMENT ALARM/SEISMIC GROUPS ALARM/SEISMIC GROUPS ALARM/SEISMIC GROUPS ALARM/SEISMIC GROUPS ALARM/SEISMIC GROUPS YES = The reporting of zone alarm will be delayed for the programmed time.

  • Page 46: Backbone Section Originator Id

    BACKBONE SECTION BACKBONE SECTION BACKBONE SECTION BACKBONE SECTION BACKBONE SECTION ORIGINATOR ID ORIGINATOR ID ORIGINATOR ID ORIGINATOR ID ORIGINATOR ID Backbone Section This section contains the programming for the backbone modules. If you will be installing an PC6442 or PC6443 module, program 01 for the Originator ID code. The system ORIGINATOR ORIGINATOR ORIGINATOR...

  • Page 47: Module Hardware

    MODULE HARDWARE MODULE HARDWARE MODULE HARDWARE MODULE HARDWARE MODULE HARDWARE EBUS MODULE/BACKBONE MODULE EBUS MODULE/BACKBONE MODULE EBUS MODULE/BACKBONE MODULE EBUS MODULE/BACKBONE MODULE EBUS MODULE/BACKBONE MODULE Module Hardware Ebus Modules Select this section to enroll PC6501, PC6108A, PC6216, PC6204, PC6400 or PC6820 modules. See the EBUS EBUS EBUS...

  • Page 48: Prn Entire Buff

    EVENT BUFFER EVENT BUFFER EVENT BUFFER EVENT BUFFER EVENT BUFFER PRINT BUFFER PRINT BUFFER PRINT BUFFER PRINT BUFFER PRINT BUFFER Event Buffer DIAGNOSTICS DIAGNOSTICS DIAGNOSTICS DIAGNOSTICS DIAGNOSTICS DIAGNOSTICS DIAGNOSTICS DIAGNOSTICS DIAGNOSTICS DIAGNOSTICS The installer can review the events stored in the event buffer by sending the contents of it to a printer. See EVENT EVENT EVENT...
  • Page 49 Appendix A List of Available ASCII Characters NOTE: Characters 000 - 007 are language dependent. µ...
  • Page 50 Appendix B Reporting Codes Notes on SIA Format If the SIA 1 Account # option is selected, the panel will send Notes on Contact ID the system account code along with its data transmission (ref # The following is a list of Contact ID reporting codes. The first [000401], scroll to option).
  • Page 51 Dialer Recommended SIA Auto Rep Reporting Code Code Sent When... Direction* Contact ID Codes** Periodic Test periodic test transmission Other (6) A2 RP-000 Buffer Near Full printer not used or off-line for 1875 events Other (6) 23 JL-000 User System Test bell/communications test Other (6) A1...
  • Page 52 © 2002 Digital Security Controls Ltd. Direct all comments and suggestions Toronto, Canada • www.dsc.com concerning DSC publications to Printed in Canada 29005177 R002 pubs@dscltd.com...

Table of Contents