Advertisement
8. MAIN UNIT ASSY. (2)
BIND SCREW 2.6x4 CF
(AA25514)
MAIN UNIT
ASSY. (1)
ASSEMBLY PROCEDURE
1. Fix the Motor Unit in the Main Unit Assy.(1) by inserting and tightening the two Bind Screws 2.6x4
CF.
Tightening Torque: 0.59N·m ±10%
2. Insert the wires (board-in connectors) from the Motor Unit into the Main PWB Unit and solder the
Motor Unit terminals. (Soldering temperature 350ºC ± 10%)
* Take care of the terminal direction
MOTOR UNIT
(EH70482)
(6kgf·cm)
−8−
MAIN PWB UNIT
(EH70496)
Red
Black
Advertisement
