Download
Share
Print this page
Max CN452S Operating And Maintenance Manual
  1. Manuals
  2. Brands
  3. Max Manuals
  4. Power Tool
  5. CN452S
  6. Operating and maintenance manual

Max CN452S Operating And Maintenance Manual

Pneumatic coil nailer
Hide thumbs

Advertisement

Quick Links

Download this manual
CN452S
PNEUMATIC COIL NAILER
DRUCKLUFT-COIL-NAGLER
CLOUEUSES PNEUMATIQUES
A BOBINES
SPARACHIODI AD ARIA COMPRESSA
CON CARICAMENTO A ROTOLO
CLAVADORAS NEUMATICAS PARA
ROLLOS DE CLAVOS
OPERATING and MAINTENANCE MANUAL
MANUEL D'UTILISATION et D'ENTRETIEN
MANUALE DI FUNZIONAMENTO E MANUTENZIONE
MANUAL DE OPERACIONES Y MANTENIMIENTO
WARNING:
ACHTUNG!
AVERTISSEMENT:
ATTENZIONE:
ATENCION:
BETRIEBSANLEITUNG
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING
AND INSTRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
LESEN SIE VOR INBETRIEBNAHME DES GERÄTES DIE GEBRAUCHS- UND
SICHERHEITS-HINWEISE. BITTE BEWAHREN SIE DIE GEBRAUCHS- UND
SICHERHEITSHINWEISE AUF, DAMIT SIE AUCH SPÄTER EINGESEHEN WERDEN
KÖNEN.
AVANT D'UTILISER CET OUTIL, LIRE CE MANUEL ET LES CONSIGNES DE SECURITE
AFIN DE GARANTIR UN FONCTIONNEMENT SUR.
CONSERVER CE MANUEL EN LIEU SUR AVEC L'OUTIL AFIN DE POUVOIR LE
CONSULTER ULTERIEUREMENT.
PRIMA DI USARE QUESTA MACCHINA, STUDIARE IL MANUALE PER PRENDERE ATTO
DEGLI AVVERTIMENTI E
TENERE QUESTE ISTRUZIONI
FUTURE
PARA EVITAR GRAVES DAÑS PERSONALES O EN LA PROPIEDAD.
ANTES DE EMPLEAR LA HERRAMIENTA, LEER CON ATENCIÓN Y COMPRENDER LOS
SIGUIENTES INSTRUCCIONES DE SEGURIDAD.
DELLE ISTRUZIONIPER LA SICUREZZA.
INSIEME ALLO STRUMENTO PER CONSULTAZIONI

Advertisement

loading
Need help?

Need help?

Do you have a question about the CN452S and is the answer not in the manual?

Questions and answers

Related Manuals for Max CN452S

Summary of Contents for Max CN452S

  • Page 1 CN452S PNEUMATIC COIL NAILER DRUCKLUFT-COIL-NAGLER CLOUEUSES PNEUMATIQUES A BOBINES SPARACHIODI AD ARIA COMPRESSA CON CARICAMENTO A ROTOLO CLAVADORAS NEUMATICAS PARA ROLLOS DE CLAVOS OPERATING and MAINTENANCE MANUAL BETRIEBSANLEITUNG MANUEL D’UTILISATION et D’ENTRETIEN MANUALE DI FUNZIONAMENTO E MANUTENZIONE MANUAL DE OPERACIONES Y MANTENIMIENTO...
  • Page 2 INDEX INHALTSVERZEICHNIS INDEX INDICE INDICE ENGLISH Page 3 to 14 Page DEUTSCH Page 15 to 26 Page FRANÇAIS Page 27 to 38 Page ITALIANO Page 39 to 50 Page ESPAÑOL Page 51 to 62 Page DEFINITIONS OF SIGNAL WORDS WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

  • Page 3: Table Of Contents

    ENGLISH CN452S PNEUMATIC COIL NAILER INDEX 1. SAFETY INSTRUCTIONS ......4 2. SPECIFICATIONS & TECHNICAL DATA ..7 3. AIR SUPPLY AND CONNECTIONS ....9 4. INSTRUCTIONS FOR OPERATION ... 10 5. MAINTAIN FOR PERFORMANCE ....14 6. STORING ............. 14 7.

  • Page 4: Safety Instructions

    1. SAFETY INSTRUCTIONS WARNING: TO AVOID SEVERE PERSONAL INJURY OR PROPERTY DAMAGE BEFORE USING THE TOOL, READ CAREFULLY AND UNDERSTAND THE FOLLOWING “SAFETY INSTRUCTIONS”. FAILURE TO FOLLOW WARNINGS COULD RESULT IN DEATH OR SERIOUS INJURY. PRECAUTIONS ON USING THE TOOL WEAR SAFETY GLASSES OR GOGGLES Danger to the eyes always exists due to the possibility of dust being blown up by the exhausted air or of a fastener flying up due to the improper handling of the tool.
  • Page 5 INSPECT SCREW TIGHTNESS Loose or improperly installed screws or bolts cause accidents and tool damage when the tool is put into operation. Inspect to confirm that all screws and bolts are tight and properly installed prior to operating the tool. DO NOT TOUCH THE TRIGGER UNLESS YOU INTEND TO DRIVE A FASTENER Whenever the air supply is connected to the tool, never touch the trigger unless you intend to drive a fastener into the work.
  • Page 6 Keep the tool in a dry place out of reach of children when not in use. • Do not use the tool without Safety Warning label. • Do not modify the tool from original design or function without approval by MAX CO., LTD.

  • Page 7: Specifications & Technical Data

    2. SPECIFICATIONS AND TECHNICAL DATA 1. NAME OF PARTS Α Frame Β Cylinder Cap Χ Contact Arm ∆ Nose Ε Magazine Φ Trigger Γ Grip Η Exhaust Cover 2. TOOL SPECIFICATIONS 3. FASTENER SPECIFICATIONS NAIL LENGTH HEIGHT 11-3/16” (284 mm) 1”...
  • Page 8 4. TECHNICAL DATA Α NOISE A-weighted single-event ------ LWA, 1s, d 93.72 dB sound power level A-weighted single-event ------ LpA, 1s, d 85.82 dB emission sound pressure level at work station These values are determined and documented in accordance to CEN/TC 255 WG 1N 45.3 E. (EN-standard in preparation) Β...

  • Page 9: Air Supply And Connections

    HOSES: Hose has a min. ID of 1/4” (6 mm) and max. length of no more than 17” (5 meters). The supply hose should contain a fitting that will provide “quick disconnecting”...

  • Page 10: Instructions For Operation

    4. INSTRUCTIONS FOR OPERATION Read section titled “SAFETY INSTRUCTIONS”. BEFORE OPERATION Α Wear Safety Glasses or Goggles. Β Do not connect the air supply. Χ Inspect screw tightness. ∆ Check operation of the contact arm & trigger if moving smoothly. Ε...
  • Page 11 Χ Nail loading: Place a coil of nails over the post in the magazine. Uncoil enough nails to reach the feed pawl, and place the second nail between the teeth on the feed pawl. The nail heads fit in slot on nose. ∆...
  • Page 12 As nails are driven the plastic sheet will feed out of the tool. When sufficient strip has been fed out it can be torn away by pulling against the tear edge in the nose. ADDITINA INSTRUCTIONS FOR NEW CN452S COIL NAILER METAL CONTACT TIP FOR LOORING APPLICATION CONTACT TIP REPLACEMENT...

  • Page 13: Maintain For Performance

    ∆ All quality tools will eventually require servicing or replacement of parts because of wear from the normal use. 7. TROUBLE SHOOTING/REPAIRS The troubleshooting and/or repairs shall be carried out only by the MAX CO., LTD. authorised distributors or by other specialists.