Pan Inverse
1.) Navigate the main menu to reach PT Sett, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Xreverse, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to highlight Yes or No.
4.) Press the <ENTER> button to confirm your choice.
Tilt Inverse
1.) Navigate the main menu to reach PT Sett, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Yreverse, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to highlight Yes or No.
4.) Press the <ENTER> button to confirm your choice.
Pan Calibration
1.) Navigate the main menu to reach PT Sett, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Xrevise, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to adjust the value from 0-255.
4.) Press the <ENTER> button to confirm your choice.
Tilt Calibration
1.) Navigate the main menu to reach PT Sett, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Yrevise, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to adjust the value from 0-255.
4.) Press the <ENTER> button to confirm your choice.
Focus Calibration
1.) Navigate the main menu to reach PT Sett, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Frevise, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to adjust the value from 0-255.
4.) Press the <ENTER> button to confirm your choice.
Blockhead™ Z9 Manual Rev. A
Page 13
© 2016 Blizzard Lighting, LLC