Pan Inverse
1.) Press <MENU> to enter EDIT interface.
2.) Use the <UP/DOWN> buttons to choose Pint, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to choose Yes/No, press <ENTER> to confirm,
or <MENU> to exit.
Tilt Inverse
1.) Press <MENU> to enter EDIT interface.
2.) Use the <UP/DOWN> buttons to choose Tint, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to choose Yes/No, press <ENTER> to confirm,
or <MENU> to exit.
Pan Angle Setting
1.) Press <MENU> to enter EDIT interface.
2.) Use the <UP/DOWN> buttons to choose Angl, press <ENTER>.
3.) Use the <UP/DOWN> buttons to choose either 630 or 540, press <ENTER> to
confirm, or <MENU> to exit.
No DMX / Lost Signal Setting
1.) Press <MENU> to enter EDIT interface.
2.) Use the <UP/DOWN> buttons to choose Lost, press <ENTER>.
3.) Use the <UP/DOWN> buttons to choose either Hold (holds the current status),
Blac (no light output), Soun (run sound mode), or Auto (run auto programs), then
press <ENTER> to confirm, or <MENU> to exit.
Hypno™ Beam Manual Rev. A
Page 15
© 2017 Blizzard Lighting, LLC