Setting Guidelines; Rated System Frequency Primval; Identification; Application - ABB RED650 Applications Manual

Section 21
Basic IED functions
21.4.2
21.5
21.5.1
21.5.2
21.5.3
21.6
406
A function block, SETGRPS, defines how many setting groups are used. Setting is
done with parameter MAXSETGR and shall be set to the required value for each
IED. Only the number of setting groups set will be available in the Parameter
Setting tool for activation with the ActiveGroup function block.

Setting guidelines

The setting ActiveSetGrp, is used to select which parameter group to be active. The
active group can also be selected with configured input to the function block
SETGRPS.
The length of the pulse, sent out by the output signal SETCHGD when an active
group has changed, is set with the parameter t.
The parameter MAXSETGR defines the maximum number of setting groups in use
to switch between. Only the selected number of setting groups will be available in
the Parameter Setting tool (PST) for activation with the ActiveGroup function
block.

Rated system frequency PRIMVAL

Identification

Function description
Primary system values

Application

The rated system frequency and phase rotation direction are set under Main menu/
Configuration/ Power system/ Primary Values in the local HMI and PCM600
parameter setting tree.
Setting guidelines
Set the system rated frequency. Refer to section
SMAI" for description on frequency tracking.

Summation block 3 phase 3PHSUM

IEC 61850 IEC 60617
identification identification
PRIMVAL -
"Signal matrix for analog inputs
Line differential protection RED650 2.2 IEC
1MRK 505 393-UEN B
M15259-3 v4
IP15064-1 v2
GUID-B8B3535D-227B-4151-9E98-BEB85F4D54DE v1
ANSI/IEEE C37.2
device number
-
M15288-3 v6
M15292-3 v2
SEMOD55968-1 v2
Application manual