Fuses - Arctic Cat DVX 250 Operator's Manual

When replacing the headlight bulb, be careful not to touch the
glass portion of the bulb. Grasp the new bulb with a clean cloth.
Taillight/Brakelight
4. Install the lens. Tighten the two screws securely.

FUSES

The fuse box (with three active
fuses and one spare fuse) is located
under the seat near the battery.
NOTE: To remove the fuse, com-
n
press the locking tabs on either
side of the fuse cover and lift off;
then remove and replace the fuse.
250_DVX MANUAL
KM192A
KM195
! CAUTION
KM143B
99
3. Install the new bulb into the
housing; then secure with the
spring clip.
4. Connect the
connector to the bulb; then
install the rubber boot.
To replace the taillight/brakelight
bulb, use the following procedure.
1. Remove the two screws and
remove the lens.
2. Push the bulb in and turn it
counterclockwise.
3. Install the new bulb by turning it
clockwise while pushing in.
02.08.2006, 15:30 Uhr
three-wire
KM102
96