Troubleshooting - Windster WS-3230SS User Manual

WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
Light Issue (One light
not turning on)
Burnt/melted control
switch
Speed levels not
working correctly
Unit lacking smoke
intake
Unit showing no power
indication
Unit making humming
noise

TROUBLESHOOTING

TROUBLESHOOTING
WS-32 Series
1. Replace defective fixture with new fixture.
1. Complete Control switch replacement is required.
1. Complete Control switch replacement is required.
1. Make sure a reducer has not been installed.
1. Make sure the power source is working properly.
2. All wiring is connected.
1. Replace defective capacitor.
11