Installation; Operation & Features - Windster WS-3230SS User Manual

8

INSTALLATION

UNDER CABINET INSTALLATION (Top round outlet)
a. Make sure all preparation steps are completed.
b. Feed the wires coming out of the hood through the bottom of the cabinet.
c. Lift the unit up flesh against the wall and the bottom of the cabinet.
d. Using the screws and washers provided, insert into each of the keyhole
openings and tightly secure the unit against the bottom of the cabinet.
NOTE: Install more screws through the back of the unit if necessary.
e. Connect 7" ducting to the collar of the hood.
f. Finish off by sealing the connection point with aluminum tape.
1.
CONTROL SWITCH LAYOUT (from left to right)
a. Power ON / OFF
b. Low speed
c. Medium speed
d. High speed
e. Lights ON / OFF
Activate delay shut-off: Press "Button A" once to activate 90 seconds delay
shut-off. Light surrounding button will flash and fan will turn off after 90 seconds.
Turn off Fan: Press "Button A" twice to instantly turn off the fan.
2.
FILTERS
a. (2) 14-3/8" x 12-3/4" Aluminum filters and (2) fillers (30" model)
b. (2) 14-3/8" x 12-3/4" Aluminum filters and (2) fillers (36" model)
c. (3) 14-3/8" x 12-3/4" Aluminum filters and (2) fillers (42" model)
d. (3) 14-3/8" x 12-3/4" Aluminum filters and (2) fillers (48" model)
NOTE: Install handles onto the frame of the aluminum filter before use.
INSTALLATION
OPERATION & FEATURES
a b c d e