Advertisement
3. Starting Web Management
The following shows how to start up the Web Management of the
Cellular Gateway. Note the Cellular Gateway is configured through an
Ethernet connection. Please make sure the manager PC must be set to
the same IP subnet address.
For example, the default IP address of the Cellular Gateway is
192.168.1.1, then the manager PC should be set to 192.168.1.x
(where x is a number between 2 and 254), and the default subnet
mask is 255.255.255.0.
ICG-2420-LTE
IP Address:
192.168.1.1
Logging in to the Cellular Gateway
1. Use Internet Explorer 8.0 or above Web browser and enter IP
address http://192.168.1.1 (the factory default IP address or
the one that you have just changed in console) to access the Web
interface.
RJ45/UTP Cable
Figure 3-1: IP Management Diagram
PC / Workstation with Web
Browser 192.168.1.x
5
Advertisement
