Advertisement
4. Web Management
The following shows how to start up the Web Management of the
Cellular Gateway.
Note the Cellular Gateway is configured through an Ethernet
connection. Please make sure the manager PC must be set to the
same IP subnet address.
For example, the default IP address of the Cellular Gateway is
192.168.1.1, then the manager PC should be set to 192.168.1.x
(where x is a number between 2 and 254), and the default subnet
mask is 255.255.255.0
RJ45/UTP Cable
VCG-1500WG-LTE
IP Address:192.168.1.1
IP Management Diagram
Logging in to the Cellular Gateway
1. Use Internet Explorer 8.0 or above Web browser and enter
default IP address http://192.168.1.1:9999 to access the Web
interface.
http://192.168.1.1:9999
2. After
entering
the
dialog box will appear. Please enter the default user name and
password "admin".
– 5 –
Default IP Address: 192.168.1.1
Default port number: 9999
Default Username: admin
Default Password: admin
3. When you log in the Web Interface successfully, the main page
appears as the following picture shows.
– 6 –
PC / Workstation with Web
Browser 192.168.1.x
the
following
5. Further Information
The
above
steps
introduce
VCG-1500WG-LTE. For further details on the installation of the
cellular gateway, please refer to the user manual which can be
downloaded from PLANET website.
https://www.planet.com.tw/en/support/downloads?method=category
&c1=network-security&p=vcg-1500wg-lte&type=3
If you have further questions, please contact the local dealer or
distributor where you purchased this product or you can contact
PLANET directly at the following email address:
support@planet.com.tw
2011-B90250-000
– 7 –
the
simple
installations
of
the
Advertisement
