I Ending The Cleaning Cycle - Zodiac CyclonX Instructions For Installation And Use Manual

3.6 I Ending the cleaning cycle

• To prevent damage to the equipment, only use the handle to take the cleaner out of the
water; do not lift it with the fl oati ng cable.
• Do not leave the appliance to dry out in sunlight aft er use.
• Store all the elements away from sunlight, humidity and bad weather.
• Switch off the appliance by pressing
• To take the cleaner to the edge of the pool, pull on the fl oati ng cable.
• When the cleaner is within arm's reach, pick it up by the handle and lift it gently out of the pool so that the water it
contains drains into the pool (see image
• Place the cleaner verti cally in the locati on provided on the caddy (depending on the model) for it to dry out quickly
(see image ).
• Then store it with the control box away from sunlight and any splashes. A protecti ve cover is available as an opti on
(see image ).
Tip to prevent the fl oati ng cable from becoming tangled
The cleaner's behaviour is strongly impacted by the tangling of the cable. A cable that is correctly untangled
will guarantee bett er coverage of the pool.
• Untangle the cable and lay it out in the sun so that it returns to its original shape.
• Then wind it up carefully and place it on the caddy handle (depending on the model) or on a fi xed support.
11
.
and ).