I Ending The Cleaning Cycle - Zodiac CyclonX OC 3300 TILE Installation And User Manual

3.6 I Ending the cleaning cycle

• To prevent damage to the equipment:
Do not pull on the cable to remove the appliance from the pool. Use the handle.
-
- Do not leave the appliance to dry out in sunlight after use.
- Store all the elements away from sunlight, humidity and bad weather.
- Screw the protective cap back on if you disconnect the floating cable from the control box.
• Switch off the appliance by pressing
• To bring the cleaner to the edge of the pool, pull on the floating cable.
• When the cleaner is within arm's reach, pick it up by the handle and lift it gently out of the pool so that the water it
contains drains into the pool (see figure
• Place the cleaner vertically in the location provided on the caddy (depending on the model) for it to dry out quickly
(see figure ).
• Then store it with the control box away from sunlight and any splashes. A protective cover is available as an optional
extra (see figure
Tip to prevent the floating cable from becoming tangled
The cleaner's behaviour is strongly impacted by the tangling of the cable. A cable that is correctly untangled
will guarantee better coverage of the pool.
• Untangle the cable and lay it out in the sun so that it returns to its original shape.
• Then wind it up carefully and place it on the caddy handle (depending on the model) or on a fixed support.
12
.
and
).
).