I Electricity Supply Connecti Ons - Zodiac CyclonX Instructions For Installation And Use Manual

3.4 I Electricity supply connecti ons

To prevent risk electrocuti on, fi re, or serious injury, be sure to adhere to the following:
• Use of an electrical extension is prohibited when connecti ng the control box.
• Make sure that the socket can be easily accessed at all ti mes and is protected from rain or
splashes.
• The control box is splash-proof but must not be immersed. It must not be installed in a
fl oodable area; keep it at least 3.5 metres away from the edge of the pool and avoid exposing
it to direct sunlight.
• Place the control box near the socket.
• Connect the fl oati ng cable into the control box (see image
• Push the connector in unti l you hear 2 clicks (see image
If it is not, repeat the operati on.
• Connect the supply cable (see image
imum residual current device (if in doubt contact a qualifi ed technician).
• To disconnect the fl oati ng cable from the control box, pinch the 2 clips at the end of the connector and pull at the
same ti me (see image
Tip: box positi oning for bett er operati on
Place the control box in the centre of the pool's length, following the safety conditi ons relati ng to the
electrical connecti on.
.
) Only connect the control box to a power outlet protected by a 30 mA max-
.
)
).
). Make sure the connector is suffi ciently pushed into place.
CLICK
CLICK
EN
8