Table of Contents
Advertisement
Usage
The extra weights are used to increase the grinding pressure but they should only be
used when it is absolutely necessary. Do not add on more weight than needed. The
weights lie loose and rest on the ring fitted to the motor.
Figure 4-6. Fitting extra weights
1. Attach the enclosed ring, position 1, Figure 4-6, page 20, by threading it over
the motor.
2. Screw the ring securely into place using the enclosed screws, position 2,
Figure 4-6, page 20. The ring must be secured in the upper holes on the motor.
3. Add one or two weights depending on the grinding pressure required, position 3,
Figure 4-6, page 20. Do not add more weight than necessary.
20
HTC 270 EG
2.0
Advertisement
Table of Contents
