Access To Grinding Tools - HTC 270 EG Manual

HTC 270 EG
To obtain a good grip and the possibility to control the grinder properly during grinding
with the handle in any of the forward positions, use grip 1 and 2 according to
Figure 4-2, page 15.
Figure 4-2. Handholds forward position
4.3

Access to grinding tools

Warning!
During grinding, the tools become very hot. Tip the machine back and allow it
to stand for a short while. Use protective gloves when removing the tools.
Warning!
Disconnect the electrical supply, when changing tools or repairing the machine.
Warning!
Make sure that extra weights are removed before tipping the machine. The
weights can come loose and cause damage and injuries.
2.0
Usage
15