Mechanical - Lippert Cool SpaceRunner LX800 Technical Manual

1.4 Mechanical

Dimensions (L x W)
Height
Weight
Mounting
Note: It is strongly recommend using plastic spacers instead of metal spacers to mount
TOP
TME-104P-CSR-LX800-R1V11.doc
95.9 mm x 90.2 mm (including I/O extension)
max. 14 mm on top side above PCB
max. 12 mm on bottom side above PCB
100 g
4 mounting holes
the board. With metal spacers, there is a possible danger to create a short circuit
with the components located around the mounting holes.
This can damage the board!
Pin1 Pin2
Rev 1.11 5 (50)