Maintain The Producer Iv; Overview; Cautionary Information; Preventative Maintenance Schedule - Rimage Producer 8200N User Manual

Maintain the Producer IV

Use the information in this section to keep your Producer IV in optimal
operating condition.

Overview

Regular preventative maintenance of your Producer IV can help to ensure
error-free recordings and clean printed labels. Maintenance involves
cleaning the system.
Note: The printer has its own maintenance requirements. Refer to your
printer user guide for maintenance information.

Cautionary Information

Caution: To avoid damaging the Producer IV during maintenance:
n
• Never use oils, silicone, or other lubricants on any part of the
Producer IV .
• Use only non-abrasive cleaners to wipe down the surfaces of your
Producer IV.
• Never use cleaners to clean the embedded PC.
• Avoid pouring cleaners directly onto the Producer IV. Instead, apply
the cleaner to the cloth first.
• Observe precautions for electrostatic-sensitive devices whenever you
access the embedded PC.

Preventative Maintenance Schedule

Note: Your system may require more frequent maintenance if used in a
dusty area, such as a store or warehouse.
Before you begin:
Warning! Always power off the autoloader and unplug the power cord
,
before you access the embedded PC.
1. Power off the Producer IV.
2. Disconnect the power cord.
2002543_A
Important! Failure to follow the maintenance schedule outlined below may
void your warranty.
Task
Wipe down the lift arm shaft. Pay close
attention to:
• The area around the base of the shaft
• The area just above the lift arm
Wipe down all surfaces of the
autoloader including:
• Sides and top
• Door
• Output bin
• Carousel
• Base (remove the carousel first)
• Top surface on the lift arm
Remove dust and debris from the fans
at the back of the autoloader.
Remove dust and debris from the
openings at the back of the autoloader.
For embedded systems only (6200N,
7200N, and 8200N), remove the
carousel and remove dust and debris
from the openings to the PC module.

Diagnostic Tests

Producer IV diagnostic tests are available to troubleshoot problems with
your system and ensure proper operation. For more information on
accessing, selecting, and performing diagnostic tests, refer to the
IV Perform Diagnostic Tests
support
For more information visit rimage.com/support
document that is available at
or on the user guide disc that shipped with your system.
Tool Frequency
Lint-free cloth Weekly
Lint-free cloth Weekly
Non-abrasive,
all-purpose
cleaner
Can of Monthly
compressed
air
Vacuum Monthly
Producer
www.rimage.com/
12