Maintain The Catalyst System; Overview; Cautionary Information; Preventative Maintenance Schedule - Rimage Catalyst 6000 User Manual

Maintain the Catalyst System

Use the information in this section to keep your Catalyst system in
optimal operating condition.

Overview

Regular preventative maintenance of your Catalyst system can help
to ensure error-free recordings and clean printed labels. Maintenance
involves cleaning the system.
Note: The printer has its own maintenance requirements. Refer to your
printer user guide for maintenance information.

Cautionary Information

ȸ
Caution: To avoid damaging the Catalyst system during
maintenance:
• Never use oils, silicone, or other lubricants on any part of the
Catalyst system.
• Use only non-abrasive cleaners to wipe down the surfaces of
your Catalyst system.
• Never use cleaners to clean the embedded PC.
• Avoid pouring cleaners directly onto the Catalyst system.
Instead, apply the cleaner to the cloth first.
• Observe precautions for electrostatic-sensitive devices
whenever you access the embedded PC.

Preventative Maintenance Schedule

Note: Your system may require more frequent maintenance if used in
a dusty area, such as a store or warehouse.
Before you begin:
ȸ
Warning! Always power off the autoloader and unplug the power
cord before you access the embedded PC.
2003484_A
For more information visit www.rimage.com/support
1. Power off the Catalyst system.
2. Disconnect the power cord.
Important! Failure to follow the maintenance schedule outlined below
may void your warranty.
Task
Wipe down the lift arm shaft. Pay
close attention to:
• The area around the base of the shaft
• The area just above the lift arm
Wipe down all surfaces of the
autoloader including:
• Sides and top
• Door
• Output bin
• Carousel
• Base
• Top surface on the lift arm
Inspect air filter on the side of the
system and replace if necessary.
Inspect the openings at the back of
the autoloader. Remove dust and
debris if necessary.

Diagnostic Tests

Catalyst diagnostic tests are available to troubleshoot problems with
your system and ensure proper operation. For more information on
accessing, selecting, and performing diagnostic tests, refer to the
Catalyst Diagnostics document that is available at
support.
Tool Frequency
Lint-free Weekly
cloth
Lint-free Weekly
cloth
Non-
abrasive,
all-purpose
cleaner
N/A Monthly
Vacuum Monthly
www.rimage.com/
11