Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro B1SD1-TF User Manual

2-3

Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.

Tools Needed

Philips Screwdriver
(1)

Location of Mounting Holes

Caution: 1) To avoid damaging the motherboard and its components, please do
not use a force greater than 8 lb/inch on each mounting screw during motherboard
installation. 2) Some components are very close to the mounting holes. Please take
precautionary measures to avoid damaging these components when installing the
motherboard to the chassis.
Philips Screws (8)
MAC CODE
MAC CODE
BAR CODE
P1-JBR1
P1-JPME1
P1-JPME2
CPU1
AST
2400
2-5
Chapter 2: Installation
Standoffs (8)
Only if Needed