Motherboard Features - Supermicro B1SD1-TF User Manual

B1SD1-TF Motherboard User Manual

Motherboard Features

CPU
Memory
Network Connections
I/O Devices
BIOS
Power Configuration
PC Health Monitoring
Intel ® Xeon ® D SoC (BGA Package)
Each SoC supports 8 cores
Supports up to 128GB of DDR4 VLP RDIMM ECC
memory of speeds up to 2400MHz in four memory slots.
DIMM sizes
DIMMs 2 GB, 4GB, 8GB, 16GB, and 32GB
Intel ® HostRAID
Intel ® Integrated 10GbE Controller
Two (2) 10G Ethernet ports from KR interface to BP
SATA Connections
SATA 3.0 (6Gb/s)
IPMI 2.0
IPMI 2.0 supported by Aspeed AST2400 BMC (Base-
board Management Controller)
IPMI via CMM
128 Mb AMI BIOS ®
Plug and Play, DMI 2.0, PCI 2.2, ACPI 3.0, SMBIOS 2.7,
BIOS Rescue Hotkey, Riser Card Auto Detection, BMC
GPIO
ACPI/ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Onboard Voltage Monitoring
+3.3V, +5V, +12V, +3.3V Stby, +5V Stby, VBAT, CPU
voltage, Memory voltage, CPU voltage System Temp.,
Memory Temp.
CPU 1+1-phase switching voltage regulator
CPU/System overheat LED and control
CPU Thermal Trip support
SoC Thermal Control Circuit (TCC) mechanism
Thermal Monitor Support
Fan Control
Low noise fan speed control
BMC Health Monitoring
BMC Fan control and thermal alert by sensors monitor-
ing, including CPU, memory and motherboard ambient
temperatures
1-6
Three (3) SATA 3.0 Connectors
RAID 0, 1
SPI EEPROM BIOS