16
en | Installing a Wall Mount
4.1.3
Installing the Camera to the Mounting Cap
To install the camera to the mounting cap, do the following:
1.
Figure 4.5
Number Description
1
2
3
4
5
6
7
2.
F.01U.260.456 | 1.0 | 2011.10
Remove the dome cover from the camera by loosening the
three (3) dome cover mounting screws.
Dome cover mounting screws
Rubber sealing rings for mounting screws
Dome cover
Mounting screws
Rubber sealing rings for mounting screws
Camera base
Mounting cap
Align the camera base with the mounting cap, and mount
the base to the mounting cap using the four (4) mounting
screws supplied with the camera. In moist, wet, or outdoor
applications, make sure that all four mounting screws are
equipped with a rubber seal ring, and that they are fully
tightened to ensure protection against water ingress.
Installation Manual
Mini PTZ Dome Accessories
Bosch Security Systems, Inc.