LifeSpan ROWER-442 Owner's Manual page 8

#64 10*95*M6*25 1PC
#65 d10* 20*2 1PC
#66 M6*16*S5 1PC
#67 10*100*105 1PC
S5 S6
#A
#B
49
51
63
65
2
64
STORAGE AND MAINTENANCE
1. Keep the rowing machine in a clean dry place.
2. Grasp the frame to move the rowing machine. Do not use the seat to move it. The seat will
move and it may hurt your hand and fingers.
3. Remove the battery before storing the machine for a long time.
4. Clean the Seat Rail with an absorbent cloth.
5. Always make sure all the nuts and bolts are properly tightened.
6. Regular inspection is required. Replace any worn or damaged parts immediately.
1
66
67
51
63
17
67
STEP 4:
Connect Sliding Rail (No. 17) to Main
Frame (No. 49) using Bolt (No. 64),
Washer (No. 65) and Screw (No. 66).
Tighten and secure with Allen Wrench
(No. A) and Allen Wrench (No. B).
Lift Main Frame (No. 49) and Sliding Rail
(No. 17) slightly to align the holes. Then
insert Pull Pin (No. 67).
Connect Trunk Wire 1 (No. 51) with Sensor
Wire (No. 63).
The assembly is complete!
8
ROWER-442