Other Controllers - Solid State Logic Sigma Delta User Manual

Ensure it is in the My Surfaces list.
Open the Sigma Remote Control App and assign Euphonix MIDI Port 1 to Channels 1-8, and Euphonix MIDI Port 2 to
Channels 9-16. Sigma will now require a reboot.
As soon as the Sigma Remote Application is the open application, the iPad app will be controlling Sigma.
Please note that this use of PT | Control is not qualified by Avid, who at the time of writing only specify the following
software as compatible:
- PT 12.1 or later
- Logic Pro X
- Cubase 8
- Nuendo 6.5

Other Controllers

PreSonus FaderPort + Sigma
In the Sigma Remote Control App SETTINGS page, choose FaderPort for Channels 1-8 and Unassigned for Channels 9 - 16.
Select MCU mode on the FaderPort by holding the 'Stop' key until the 'Output' key flashes, then select 'Output' to enable
MCU mode. The Channel Select < and > keys scroll the FaderPort up and down the Sigma channels; pressing the 'Bank'
key followed by the arrow keys gives access to Sigma channels 9-16. The channel focus (the channel currently controlled
by FaderPort) is indicated with a gold outline on the Remote App CHANNELS page.
Note: the Stereo/Mono mode can not be toggled by FaderPort; this must be configured from the Remote application.
Page 61