Solid State Logic Sigma Delta User Manual page 38

δ-Ctrl 16 Plugin Setup
1. Insert the -Ctrl 16 plugin on any track.
2. Make sure that your track automation status is set to either Read, Touch, or Latch. As the -Ctrl plugin uses standard
DAW automation tracks, you can now automate Sigma using the Pro Tools automation system.
The default state of the plugin is with all switches off and the absolute value of the fader at ∞, these are the initial
breakpoints stored in the track automation playlists in the DAW. When the elta-Ctrl mix system is enabled channels
assigned to plugins will be reset to the values stored in the playlists, which if no mix data has been saved, will be
the default settings. Double clicking the plugin Fader will reset the Sigma Volume back to 0dB which is the Sigma
default value. Alternatively, the Remote app 0dB button can be used.
Page 38