Web Browser Interface; Copying Sigma Settings From Earlier Software; Translating Sigma V1.0.3.X Automation To The Δelta System; Sigma Δelta Operation - Solid State Logic Sigma Delta User Manual

U
PGrADING FrOM

web Browser Interface

This method of controlling Sigma remains available to allow translation of Sigma settings to the Remote app.
Leaving it open can disrupt proper communication in the δelta system.
Important: The web browser interface should be closed at all times except when copying settings as outlined below.

Copying Sigma Settings from earlier software

Sigma settings stored with v1.0.3.x software or earlier can be recalled via the web browser using the Load tab. It is
recommended to re-save the settings in the Remote app for further use.
Translating Sigma v1.0.3.x Automation to the δelta System
If you have DAW projects that you wish to continue using with the δelta system, the automation data must be translated
to the δelta plugin in the DAW.
Pro Tools (HUI):
• View and select the track Volume automation data
• Edit > Copy (or Cut)
• Change automation view to SSL δelta Control (Volume)
• Edit > Paste Special > To Current Automation Type
• Do this for each of the 16 Sigma channels
Cubase, Nuendo and Ableton Live:
• View and select the track Volume automation data
• Edit > Copy (or Cut)
• Change automation view to SSL δelta Control (Volume)
• Edit > Paste
• Do this for each of the 16 Sigma channels
S 1.0.3.
IGMA X TO
δ
S
IGMA eLTA
Page 22