Global Setup - Solid State Logic Sigma Delta User Manual

GLOBAL SeTUP

The GLOBAL SeTUP section at the bottom of the CHANNeLS tab provides a number of useful quick functions.
NAMeS:
DAw This button will automatically rename the channels of Sigma to be the same as the first 16 names in your DAW
session. This function will only work when using legacy HUI/MCU control (not MIDI or DELTA).
CLeAr Clears all track names.
ALL:
MONO Sets all channels of Sigma to mono.
STereO Sets all channels of Sigma to stereo.
MIX A Assigns/de-assigns all channels to Mix Bus A.
MIX B Assigns/de-assigns all channels to Mix Bus B.
FADerS:
Sets all of Sigma δelta's analogue gains to unity (0dB). Useful for restoring Sigma to be a "flat" summing mixer.
0dB
SOLO:
SAFe This button enables you to protect channels in Sigma from cutting when a solo is made. For instance, you may
not want your vocal reverb on channel 16 to be cut when soloing the dry vocal on channel 15. To configure a
channel as 'solo safed' simply enable the SAFe button and then click (or touch if using a tablet) on a channel's
SOLO button. This will show you a strikethrough line on the SOLO text to indicate it has been 'solo safed'.
Clicking on the SOLO button a second time will disable it from being 'solo safed'. Exit this mode by clicking on
the SAFe button once more.
CLeAr Clears any active solos on Sigma's channels.
Page 28