Rear Panel - Roland FP-2 Owner's Manual

8

Rear Panel

1
1 USB(MIDI) Connector
Use this for connecting a computer to the FP-2 using a USB
cable (p. 45).
2 MIDI Connectors
Used for connecting external MIDI devices and for sending
and receiving MIDI messages (p. 46).
3 Pedal Jacks
Accepts connection of the supplied pedal (DP Series), or
other suitable pedals (p. 9).
4 Line In Jacks
Provide input of the audio signals. Used for connecting
audio equipment and other such devices (p. 44).
5 Line Out Jacks
Provide output of the audio signals. Also used for connecting
audio equipment and other such devices (p. 44).
These allow you to play sounds from the FP-2 through other
audio devices.
9 10
2
3
11 12 13 14
4 5
6 [Speaker] Switch
This switch turns the internal speaker on/off (p. 44).
7 [Power] Switch
This switch turns the unit on/off (p. 10).
8 DC In Jack
Connect the supplied AC adaptor here (p. 8).
9 Cord Hook
Use this to fix in place the cord from the supplied AC
adaptor (p. 8).
10 Phones Jacks
A set of headphones can be connected to this jack (p. 10).
Panel Descriptions
15 16 17
10
6 7
8
18
9
7