Placing the FP-10 on a Stand If you want to place the FP-10 on a stand, use the Roland KSCFP10 (refer to the KSCFP10 Owner’s Manual) or KS-12. Be careful not to pinch your fingers when setting up the stand.
Page 3
USB cable to connect the expansions to the FP-10’s functionality. FP-10’s USB COMPUTER port to the USB port of your computer and do * Never insert or remove the USB flash drive while this the following.
Page 4
Before You Play Turning the Power On/Off Press the [ L ] (power) button to turn on the power. If you hold down the [ L ] (power) button for one second or longer, the power turns off. Making the Power Automatically Turn Off After a Time (Auto Off) The power to this unit will be turned off automatically after a predetermined amount of time has passed since it was last used for playing music, or its buttons or controls were operated (Auto Off function).
Page 5
Making Settings on the FP-10 Selecting Tones Starting the Metronome Turning On/Off the Metronome Hold down Hold down Tone name Grand Piano 1 Grand Piano 2 Grand Piano 3 Changing the Metronome Volume Grand Piano 4 E. Piano 1 E. Piano 2...
Page 6
Making Settings on the FP-10 Playing an Internal Song Adjusting the Reverberation of the Sound (Ambience) & “Internal Song List” (p. 13) The reverberation that is characteristic of a performance in a concert Playing/Stopping an Internal Song hall can be added to the sound.
Page 7
Making Settings on the FP-10 Dividing the Keyboard in Two Changing the Keyboard Playing Feel (Twin Piano) (Key Touch) You can divide the keyboard into left and right sections so that two You can change the playing feel of the keyboard.
Page 8
Making Settings on the FP-10 Changing the Key of the Keyboard Hearing Sound from the Built-in Speakers (Transpose) and the External Speakers The keyboard can be transposed in semitone steps. With the factory settings, the built-in speakers do not produce...
Page 9
Making Settings on the FP-10 Saving the Settings (Memory Backup) Restoring the Factory Settings (Factory Reset) When this unit’s power is turned off, it will return to its default settings. However, if desired, you can save the following settings The settings you’ve changed in the function mode can be restored to so that they will be remembered even after the power is off.
If you install an app on your smartphone, tablet, or other mobile device, and connect it via Bluetooth, you can use the app to view the status of the FP-10 on the large screen of your mobile device, and use the app to operate the FP-10.
Page 11
Make the connection again as described in“Connecting to Piano Partner 2” (p. 10). If you are still unable to connect with the app, access the following URL and find your nearest Roland Service Center or authorized Roland distributor in your country. http://roland.cm/service...
If you don’t hear it through headphones: It may be that the unit has malfunctioned. Please contact your dealer or a Roland customer service center. High-pitched ringing is heard p. 6 If you also hear it through headphones: To decrease the metallic ringing, adjust the “Ambience”...
Internal Song List Category: Listening Song Title Composer Barcarolle Fryderyk Franciszek Chopin Mikhail Ivanovich Glinka, Zhavoronok Arranged by Mily Alexeyevich Balakirev Valse, op.34-1 Fryderyk Franciszek Chopin Polonaise op.53 Fryderyk Franciszek Chopin Nocturne No.20 Fryderyk Franciszek Chopin Franz Peter Schubert, Die Forelle Arranged by Franz Liszt Reflets dans l’Eau Claude Achille Debussy...
Main Specifications Roland FP-10: Digital Piano Sound generator Piano Sound: SuperNATURAL Piano Sound Keyboard 88 keys (PHA-4 Standard Keyboard: with Escapement and Ivory Feel) Power Supply AC adaptor 4 W (3–6 W) Average power consumption while piano is played with volume at center position...
Need help?
Do you have a question about the FP-10 and is the answer not in the manual?
Questions and answers
Headphones or auxiliary speakers hooked to headphone jack volume is way too low