Using The V-Link Function - Roland FP-2 Owner's Manual

fig.disp—-
3.
Press the [-] or [+] button to select pedal setting.
Indication
OFF You can use a function assigned to the
sostenuto(FC1) pedal and the soft(FC2)
pedal.
The sostenuto(FC1) pedal is dedicated to
FC1
switching Setup. The function assigned to
the sostenuto(FC1) pedal cannot to be
used.
FC2 The soft(FC2) pedal is dedicated to
switching Setup. The function assigned to
the soft(FC2) pedal cannot to be used.
Transferring the FP-2's Settings to an
External MIDI Device (Bulk Dump)
You can transfer the contents of FP-2's Setup settings to an
external MIDI device. This operation is called "bulk dump."
1.
Use a MIDI cable (optional) to connect the FP-2's
MIDI OUT connector to the MIDI IN connector
on an external sequencer, or use a USB cable to
connect the computer.
2.
Switch to Function mode (p. 38), and press the
[Sound Control] button.
3.
Hold down the [Sound Control] button, and press
the [-] or [+] button to select bulk dump.
"dnP" is displayed, and the [Play/Stop] button's
indicator begin flashes.
fig.disp—-
4.
Put the external sequencer in record mode.
5.
Press [Play/Stop] to transmit the settings.
After the transmitting is finished, "dnP" is appeared in
display.
6.
Stop the external sequencer.
While holding
Press
down...
Description
Flashes Flashes
Chapter 4 Other Functions

Using the V-LINK function

Connecting the FP-2 to a V-LINK compatible image device
allows you to control the images with the FP-2.
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
V-LINK
V-LINK ( ) is functionality promoted by Roland
that allows linked performance of music and visual material.
By using V-LINK-compatible video equipment, visual effects
can be easily liked to, and made part of the expressive
elements of a performance.
■ How to Use the V-LINK
1.
Hold down the [Reverb] button and press the
[Split] button.
The display changes as shown below, and the FP-2
switches to Image Control mode.
fig
* The display does not change when chords are displayed.
You can control images using the twelve keys at the left
end of the keyboard.
fig
A0~G#1
* While V-LINK is switched on, no sound is produced when you
press any of the twelve keys at the left end of the keyboard.
2.
Hold down the [Reverb] button and press the
[Split] button once again to exit.
49