Table of Contents
Advertisement
Panel descriptions
Rear panel (connecting the external equipment)
USB flash drive
AC Adaptor
Pedal unit (RPU-3)
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
6
DC IN jack
Connect the included AC adaptor here.
USB FOR UPDATE port
You can connect a USB flash drive here.
* Never turn off the power or remove the USB flash drives while the
screen indicates "Executing... " .
USB COMPUTER port
You can connect this to your computer so that it can exchange
performance data with the RD-08.
* Do not use a USB cable that is designed only for charging a device.
Charge-only cables cannot transmit data.
MEMO
¹ The RD-08 supports USB MIDI.
6
6
6
External MIDI Device
Power Cord
AC Outlet
Expression pedal (EV Series)
or
Pedal switch (DP Series)
7
8
7
MIDI OUT connector
Transmits MIDI messages to an external MIDI device connected
here.
PEDAL jack (DAMPER/R, FC2/C, FC1/L)
Connecting the pedal switch provided with the RD-08 to the
DAMPER jack allows you to use the switch as a damper pedal.
With a pedal connected to the FC1 or FC2 jack, you can then
assign a variety of functions to the pedal (p. 19).
* Use only the specified expression pedal. By connecting any other
expression pedals, you risk causing malfunction and/or damage
to the unit.
Mic
Audio player
headphones
Monitor speakers
(powered)
Mixer etc.
Advertisement
Table of Contents
