Changing The Effect Type - Roland FP-2 Owner's Manual

Chapter 4 Other Functions
fig.04-02
■ Works of the Soft Pedal(FC2)
When the instrument is turned on, this is set to function as a
soft pedal.
1.
Switch to Function mode (p. 38), and press the
[Strings/Pad] button.
2.
Press the [-] or [+] button to select the pedal
function.
■ Works of the Sostenuto
Pedal(FC1)
When the instrument is turned on, this is set to function as a
sostenuto pedal.
1.
Switch to Function mode (p. 38), and press the
[Voice/GM2] button.
2.
Press the [-] or [+] button to select the pedal
function.

Changing the Effect Type

1.
Switch to Function mode (p. 38), and press the
[Effects] button.
The effect number appears in the display.
fig.01-22
40
2.
Press the [-] or [+] button to select the effect.
You can select from the following.
Indi-
Effects
cation
SYMPATHETIC
S.rE
RESONANCE
Enh ENHANCER
dLy DELAY
Cho CHORUS
TREMOLO
t.ch
CHORUS
rot ROTARY
PHASER
Pha
FLn FLANGER
Odr OVERDRIVE
dSt DISTORTION
Description
When you depress the damper
pedal on an acoustic piano, the
sound from the strings that
were struck resonates with
other strings, adding rich rever-
berations and broadness to the
sound.
This controls the overtone
structure of the high frequen-
cies, adding sparkle and tight-
ness to the sound.
This effect adds a delay sound
like an echo.
You can give the sound greater
dimension, with more fatness
and breath.
This effect is Chorus effect with
added cyclic modulation of vol-
ume.
This effect adds spinning
sounds similar to the sound of
an organ using a rotating
speaker of the past.
This effect adds a phase-shifted
sound to the direct sound, pro-
ducing a twisting modulation
that creates spaciousness and
depth.
This effect produces a metallic
resonance that rises and falls
like a jet airplane taking off or
landing.
This effect creates a soft distor-
tion similar to that produced by
vacuum tube amplifiers.
This effect produces a more
intense distortion than Over-
drive.