Performing Along With Session Partner; Changing The Volume - Roland FP-2 Owner's Manual

Chapter 2 Playing Along with Rhythms

Performing Along With Session Partner

fig.02-05
Now, let's try performing along with Session Partner.
Since a wide variety of musical genres is provided, be sure to use a Rhythm
that best suits the song you are performing. Please refer to "Selecting a
Rhythm" (p. 29).
1.
Press the [Start/Stop] button.
The [Start/Stop] button's indicator lights in red, and the intro begins to play.
After the intro is played, the light's color changes to green.
The chord progression advances automatically, freeing you up to play the
melody.
2.
When you press the [Start/Stop] button once more, the
ending is played, and the Rhythm stops.
While the ending is being played, the [Start/Stop] button's indicator lights
in red. When the Rhythm stops, the [Start/Stop] button's indicator goes out.
Additionally, when the [Start/Stop] button's indicator is lit in red, if you
then press the [Start/Stop] button once more, you can immediately stop the
intro or ending, even when while these are being played.

■ Changing the Volume

fig.02-05
1.
While holding down the [Part] button, press the [-] or [+]
button.
28
Press
While holding down...
1,2
For more information on
the different Rhythm types,
refer to "Rhythm List" (p.
59).
You can set the Chord
display on or off (p. 43).
You can also specify the
chords to be played in a
Rhythm. For details, refer to
"Performing With the
Chord Progression
Specified in the Left Hand
(Chord Progression off)" (p.
31).
You can change the chord
progression patterns. Refer
to "Selecting a Rhythm's
Chord Progression" (p. 30).
You can press the [Start/
Stop] button to finish
without playing an Intro or
Ending. Refer to "Setting
the Intro and Ending On or
Off" (p. 43).