Chapter 4 Other Functions; How To Make Settings - Roland FP-2 Owner's Manual

Chapter 4 Other Functions

You can make a variety of performance- and recording-
related settings in "Function Mode."

How to Make Settings

1.
Hold down the [Display] button, and press the [-]
button.
fig.04-01
While holding
down...
"Fnc" appears in the display, and the FP-2 switches to
Function Mode.
The indicators flash on the [Display] button and buttons
to which a function is assigned.
2.
Press any flashing button (other than the
[Display] button).
The indicators on all buttons except the pressed button
and the [Display] button go off.
Each value is displayed.
While pressing the button, function name is displayed.
3.
Press the [-] or [+] button or play a key on the
keyboard to set.
fig.04-01
or
Press
4.
Press the [Display] button to exit Function Mode.
The button's indicator will return to the previous state.
38
Press
Play a key
Button Function
Setting the part to which
[Reverb]
effects are added
[Effects] Effect Type
Temperament
[Transpose]
Octave shift
[Split]
[Piano] Master Tuning
How the soft pedal(FC2)
[E. Piano]
effects are applied
How the sostenuto pedal(FC1)
[Organ]
effects are applied
How the damper pedal effects
[Guitar/Bass]
are applied
[Strings/Pad] Soft pedal(FC2)s work
[Voice/GM2] Sostenuto pedal(FC1)s work
Metronome beat
[
(Metronome)]
Setting the Intro and Ending
[Start/Stop]
on or off
Root note of the chord pro-
[Part]
gression
[Chord Fixing a set chord progression
Progression]
[Play/Stop] Chord display
[Rec] MIDI settings
Bulk Dump, Pedal Shift,
[Sound
Transferring the program
Control]
change
[Equalizer] Equalizer
Page
p. 41
p. 40
p. 42
p. 41
p. 41
p. 39
p. 39
p. 39
p. 40
p. 40
p. 42
p. 43
p. 43
p. 43
p. 43
p. 47
p. 48
p. 44