Using The Metronome; Changing The Tempo; Changing The Volume - Roland FP-2 Owner's Manual

Using the Metronome

Here's how you can make use of the metronome.
fig.02-01
1.
Press the [
sound.
The [ (Metronome)] button's indicator flashes in red and green in time
with the beat selected at that time. The indicator lights in red on the
downbeats, and in green on weak beats.
2.
To stop the metronome, press the [
again.

■ Changing the Tempo

1.
Press the [Display] button, getting its indicator to light in
orange.
The tempo is displayed.
fig.02-02
2.
Press the [-] or [+] button to adjust the tempo.

■ Changing the Volume

The volume of the metronome can be adjusted, with ten volume levels
available.
This is set to "5" when the instrument is turned on.
1.
While holding down the [
[-] or [+] button.
The currently selected metronome volume is displayed.
fig.02-04
(Metronome)] button to have the metronome
Press to
light in orange
(Metronome)] button, press the
Press
Chapter 1 Playing the Keyboard
1,2
(Metronome)] button
While holding down...
Pressing the [Display]
button alternately displays
the tempo, the currently
selected Rhythm number
(indicated by an initial "r"),
and the currently selected
Song number (indicated by
an initial "S").
button indicator
Red Rhythm number
Orange Tempo
Green Song number
Only the display of the
tempo and rhythm number
alternates when you press
the [Display] button while
performing with Session
Partner.
You can change the beat of
metronome. Refer to p. 42.
25